1
Revised 12/9//13
Product Description
The SH Series is the flagship of the Antenna Factor
GPS line. These high-performance GPS antennas
combine superior performance, advanced
operational and protection features, and low
power consumption. This makes them ideal for
telematics, fleet management, navigation, tracking
and other applications that require a compact,
high-performance GPS antenna. For maximum
compatibility with the host receiver, the SH accepts
supply voltages from +2.5VDC to +12VDC and is
protected against shorts, over current, or reverse
polarity situations. The antennas attach via a SMA,
MCX, MMCX or customer-specified connector.
Features
Compact
High-gain, low-noise design
Low current consumption
Wide operating voltage
Protection circuit
Wide operating temperature
Fully weatherized
Waterproof
Rugged & damage-resistant
Magnetic mount
Electrical Specifications
Center Frequency:
1575.42MHz
Bandwidth:
10MHz @ 3dB point
Impedance:
50-ohms
VSWR:
1.5 typ.
Ant. Gain:
5.0dB min.
Axial Ratio:
1.0dB typ.
Elev. Angle Cov.:
590 degrees
Az. Bearing Cov.:
360 degrees
Polarization:     
RHCP
System Gain:    
28dB (typ. includes 4dB
cable & filter loss)
Noise Figure:    
<1.8dB @ fo, 2dB max.
Input Voltage:    
+2.5VDC to +12VDC
(Autoswitch)
ANT-GPS-SH-xxx
Data Sheet
by
Ordering Information
ANT-GPS-SH-SMA (with SMA connector)
ANT-GPS-SH-MCX (with MCX connector)
ANT-GPS-SH-MMX (with MMCX connector)
Current:
510mA typ. @ 5V
(1113mA max. @ 12V)
Oper. Temp. Range:
30癈 to +85癈
Mounting:
Magnetic and/or screw
Cable:
RG-174U (Low-loss,
0.7dB/m)
Cable Length:   
117" +/6" (3m)
Connector:
SMA, MCX, MMCX, other
by special order
Weight:
3.32oz (94g)
Electrical Specifications Cont.
45.0 mm
(1.77")
12.5 mm
(0.49")
Side
Top
36.6 mm
(1.44")
36.5 mm
(1.44")
10.6 mm
(0.42")
Bottom
11.0 mm
(0.43")
6.9 mm
(0.27")
M2.6x0.45 Threads
0.12" (3.0) Deep